Page 22 Mealstream Ovens 32Z3387 Issue 2
Membrane panel circuit
You will need:
A Digital Multi-meter (D.M.M.)
1. Isolate the oven from the mains supply.
2. Remove the Logic Assembly from the Control Panel Housing.
3. Unplug the membrane “tail” from the Logic PCB Assy.
4. Using a D.M.M., check for continuity between the correct terminals when the
pads are pressed.
5. When the panel has been tested, re-assemble and re-test the control housing.
1 10
Comments to this Manuals